AMCC 3WARE 9590SE Guide d'installation télécharger pdf (Page 33)

Replacing the Battery

www.3ware.com 29

5 Once the bottom of the module is free, slide the module up to

release the clips on the top.

Figure 22. Removing the battery module

6 Disconnect the battery power cable from the BBU.

To do so, press down on the lever-like clip on the battery power

connector and slide it out of the slot.

(If desired, you can remove the BBU control module to

facilitate disconnecting the power cable.)

Figure 23 shows a view of removing the power cable

connection from the underside of the BBU control module.

Bottom clip

a) Push the battery

module down gently.

b) Lift out the bottom

of the battery module

to release the clip from

the bottom hole.

c) Lift up to remove the

clips on the top edge.

1 2 ... 28 29 30 31 32 33 34 35 36

Pas de commentaire

AMCC 3WARE 9590SE Guide d'installation Page 33