AMCC 9550SX-8LP Manuel d'utilisateur télécharger pdf (Page 31)

Installation Instructions

www.3ware.com 27

3 Press down gently until the BBU is seated.

Figure 24. BBU control module connected to the controller

4 Turn the controller over, insert the plastic screw head that you

removed in step 1 into the plastic post, and tighten it gently but

firmly. (Do not over-tighten!)

Warning! To avoid possible damage to the controller

and the motherboard, make sure the module is

connected in the proper orientation, and that the

plastic post is attached.

When the plastic post and the connector are attached

correctly, the module is in the correct orientation.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Pas de commentaire

AMCC 9550SX-8LP Manuel d'utilisateur Page 31